Zhongshan Conor Electronic Technology Co.,Ltd Company Logo Zhongshan Conor Electronic Technology Co.,Ltd
5 1

SMT Glue

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Contact us

Zhongshan Conor Electronic Technology Co.,Ltd
[China]

Address
No.31 Jiangling Road Daling Huoju Development Zone Zhongshan Guangdong
Phone
86-0760-88965962
Contact name
crystal

Quick Information

  • Brand Name: CONOR
  • Place of Origin: China
  • Model Number : KY9983D

Description

KY9983D  SMT adhesives is a kind of single epoxy resin adhesive .

It is specially fit for SMT technology of sticking clips components stably in

PCB board.Long-term preservation stability is expected.Moreover it is good for

environment protection for its safety,no solvent and no smelling.

 

Features

1. Very good stable curing shapes without stringing and slumping are achieved 

at super high speed dispensing and very small dots

 

2. It could be curing in lower temperature than any other glue

 

3. Long-term preservation stability is expected.

 

4. High heat-resistivity and excellent electric properties are possessed.

 

Curing  condition

1. The curing condition recommended is in 3.5 min after the PCB’s surface temperature 

has reached 150 °C 

 

2. The longer the curing time is , the stronger adhesive strength can be obtained.

 

3.The components mounted on the PCB have different material , size , etc ,which also 

makes the actual temperature attached to the adhesive different. So please identify 

the most suitable curing conditions based on the actual production situation.

 

 

Specification

 

 Item

 Data

 Printing method

 super high speed dispensing 

 Composition

 Epoxy resin 

 Color

 Red

 Specific gravity 

 1.3

 Viscosity25℃.5rpm

 300Pa.S(300,000cps) 390pa.S(390,000cps) 

 Thixotropy index 

 6.8(1rpm / 10rpm)

 Adhesive Strength

 Capacitance 0805C4.56kgVitreous Diode 3.54.5kg

 Dielectric constant

 3.62/1MHz

 

How to use

1. Adhesive should be preserved in refrigerator(below  2~10°C)to keep on its quality.

2.Make sure the cover of the container is tight

3. Before processing, the adhesive should be taken out from the refrigerator for de-freezing about 4 hours until it reaching the room temperature.

4. The bottom of printing screen should be cleaned timely for using methylbenzene or acetic ether.

5.Quality guarantee period is six months

 

Packing:

20ml/30ml/300ml

 


Price

  • Price Condition : FOB
  • Delivery Port : Zhongshan

Packaging & Delivery

  • Packing :20ml/30ml/300ml
  • Delivery Lead Time : 15 Days
  • Minimum Order : 25 piece

Product Image

  • SMT Glue image

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To crystal
Zhongshan Conor Electronic Technology Co.,Ltd
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Epoxy Adhesives
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.